Get Instant Help From 5000+ Experts For
question

Writing: Get your essay and assignment written from scratch by PhD expert

Rewriting: Paraphrase or rewrite your friend's essay with similar meaning at reduced cost

Editing:Proofread your work by experts and improve grade at Lowest cost

And Improve Your Grades
myassignmenthelp.com
loader
Phone no. Missing!

Enter phone no. to receive critical updates and urgent messages !

Attach file

Error goes here

Files Missing!

Please upload all relevant files for quick & complete assistance.

Guaranteed Higher Grade!
Free Quote
wave

Your pre-sampling and post-sampling pump calibrations using a primary standard are both 0.05 L/min. You collect personal samples on two employees working in the operation. The samples are collected for 430 minutes (Sample 1) and 440 minutes (Sample 2).

Calculate the sample volumes for each of the samples.

The laboratory reports that the front section of Sample 1 contains 5.000 pg of methyl n-amyl ketone and the back section contains 200 pg of methyl n-amyl ketone. The front section of Sample 2 contains 4.000 pg of methyl n-amyl ketone and the back section contains 50 pg of methyl n-amyl ketone. Neither the front nor back sections of the field blank you supplied contain any detectable levels of methyl n-amyl ketone.

1. Calculate the concentrations of the two personal samples in pg/L and mg/m'.

2. Convert the result to ppm (MN for methyl n-amyl ketone = 114.2).

3. Show all the steps for your calculations.

You then reference OSHA's Table Z-1 and find that the 8-hour TWA PEL for methyl n-amyl ketone is 100 ppm

Discuss how the results of the two personal samples you collected compare to the OSHA PEL. and describe the sampling method you implemented.

You also look up the ACGH TLV for methyl n-amyl ketone and find that the TLV is 50 ppm as an 8-hour TWA exposure.

Discuss how the results for the two personal samples compare to the ACCH TLV.

Discuss whether you would recommend comparing the results of your sampling to the OSHA PEL or the ACGIH TLV. Include your rationale for the choice. and explain how you would rationalize your choice to your employer.

 Welding fumes are a common occupational exposure. Several different welding fumes can cause similar adverse health effects. Personal sampling of a welding operation at a manufacturing facility produced the following 8-hour Time-weighted average (TWA) results for individual metal fumes.

TWA results 


(R) Respirable fraction (I) hhalable fraction

Briefly summarize the primary health effects associated with overexposure to each type of metal fume. including both acute and chronic health effects. Explain what analytical methods you would use for evaluating health hazards in the workplace.

Identify the types of metal fumes that would produce similar health effects on an exposed worker. Calculate the equivalent exposure (in relation to OSHA PELS) for the metal fumes with similar health effects based on the -Result" column in the table above. Discuss whether you believe any of the individual metal fume exposures or the combined exposure exceeds an OSHA PEL or an ACGIH TLV.  

1.Compound: Methyl-n-amyl ketone (2-Heptanone)

Sample Volumes;

Flow Rate; 0.05 L/min

Sample 1; (430/1)*0.05L=21.5L

Sample 2; (440/1)*0.05L=22L

Concentrations of personal samples in mg/L and mg/m3

C = (Wf + Wb - Bf – Bb) / V where Wf: analyte found in sample front

  Wb: analyte found in sample back

  Bf: average media blank front

  Bf: average media blank back

In mg/L

Sample 1; (5000+200-0-0) / 21.5= 241.86046512mg/L

Sample 2; (4000+50-0-0) / 22= 184.09090941mg/L

In mg/L

Since mg/L=mg/L,

Sample 1=241.86046512mg/L

Sample 2=184.09090941 mg/L

In ppm

X ppm= (Y mg/L * 24.45) / M.W

M.W of C7H14O = 114.19

Sample 1; (241.86046512*24.45) / 114.19= 51.79 ppm

Sample 2; (184.0909091*24.45) / 114.19= 39.42 ppm

c.Comparison of NIOSH REL to OSHA PEL methods in concentration (in pm) results

Maximum Exposure Limit; NIOSH REL=100ppm

OSHA PEL= 100ppm

Both samples where within the range of the two methods.

Sampling method implemented; Calibration of each personal sampling pump with sampler in line, breaking the ends of the sampler immediately prior to sampling, attaching the sampler to personal sampling pump with flexible tubing and sampling at a known flow rate (0.05 L/min) (Bloomfield, Exner, Signorelli, & Scott, 2013).

Concentration (in pm) results of samples using ACGIH TLV method

Maximum Exposure Limit for ACGIH TLV; 50ppm

Thus, Sample 1 (51.79ppm) exceeded the maximum limit while Sample 2 (39.42ppm) was within range.

NIOSH 2553 method: This method was developed as part of an update of NIOSH Method 130 which combined the NIOSH Methods: the 2nd edition of the NIOSH Manual of Analytical Methods.

Major improvements over ACGIH TLV includes: lower LOD/LOQ values, improved DE recovery results (at lower levels) by using Anasorb CMS and 2% IPA in CS2, a 30 day storage stability study, and the replacement of the packed column with a Rtx-200 fused silica capillary column (Bloomfield, Stanwell-Smith, Crevel, & Pickup, 2006)

2: Homework Assignment

Primary Health Effects of Metal Fumes

Metal Fume

Similar metal

Health Effect

Acute

Chronic

Sb

Cd

Irritation to eyes, skin & lungs

Potentiate pneumoconiosis

Be

Cu, Al

“Metal fume Fever”

Damage of respiratory tract

Cd

Cd, Zn alloys

Irritation of respiratory System

Kidney damages and emphysema

Cr(VI)

Steel

Respiratory tract infections

Dermatitis and

Cu

Brass

Irritation to eyes, skin & lungs

Prolonged fever

Fe(oxides)

Steel

Irritation to eyes, skin & lungs

Siderosis

Mg(oxides)

Nausea and vomiting

Prolonged fever

Mo

Ni alloys

Irritation to eyes, skin & lungs

Shortness of breath

Ni

Inconel

Irritation to eyes, skin & lungs

Increased cancer risk

Zn(oxides)

Galvanized metal

“Metal fume Fever”

Alteration of zinc metabolism and bio distribution


Analytical Methods for evaluation of health hazards in workplace; Atomic Absorption (AAS/AES) & Inductive Coupled Plasma (ICP) (Luby, et al., 2005).

Equivalent metal fumes exposure;

E= C/OSHA PEL

Metal fume

Equivalent Exposure (E)

Sb

(0.05/0.5)=0.1

Be

(0.00001/0.002)=0.005

Cd

(0.025/0.1)=0.25

Cr(VI)

(0.02/1) =0.02

Cu

(0.03/0.1) =0.3

Fe (oxides)

(0.5/10) =0.05

Mg (oxides)

(0.02/15) =0.0013

Mo

(0.003/15) =0.0002

Ni

(0.25/1) =0.25

Zn (oxides)

(0.3/5) =0.006

References

Bloomfield, S. F., Stanwell-Smith, R., Crevel, R. W., & Pickup, J. (2006). Too clean, or not too clean: the Hygiene Hypothesis and home hygiene. Clinical and Experimental Allergy, 402–425.

Bloomfield, S., Exner, M., Signorelli, C., & Scott, E. A. (2013). Effectiveness of laundering processes used in domestic (home) settings. US: International Scientific Forum on Home Hygiene.

Luby, S., Agboatalla, M., Feikin, D., Painter, J., Billhimmer, W., Atref, A., & Hoekstra, R. M. (2005). Effect of hand-washing on child health: a randomized control trial. Lancet, 225–33.

Cite This Work

To export a reference to this article please select a referencing stye below:

My Assignment Help. (2021). Calculating Sample Volume And Methyl-n-amyl Ketone Concentration In Workplace Air Essay.. Retrieved from https://myassignmenthelp.com/free-samples/osh4301-industrial-hygiene/primary-health-effects.html.

"Calculating Sample Volume And Methyl-n-amyl Ketone Concentration In Workplace Air Essay.." My Assignment Help, 2021, https://myassignmenthelp.com/free-samples/osh4301-industrial-hygiene/primary-health-effects.html.

My Assignment Help (2021) Calculating Sample Volume And Methyl-n-amyl Ketone Concentration In Workplace Air Essay. [Online]. Available from: https://myassignmenthelp.com/free-samples/osh4301-industrial-hygiene/primary-health-effects.html
[Accessed 19 August 2024].

My Assignment Help. 'Calculating Sample Volume And Methyl-n-amyl Ketone Concentration In Workplace Air Essay.' (My Assignment Help, 2021) <https://myassignmenthelp.com/free-samples/osh4301-industrial-hygiene/primary-health-effects.html> accessed 19 August 2024.

My Assignment Help. Calculating Sample Volume And Methyl-n-amyl Ketone Concentration In Workplace Air Essay. [Internet]. My Assignment Help. 2021 [cited 19 August 2024]. Available from: https://myassignmenthelp.com/free-samples/osh4301-industrial-hygiene/primary-health-effects.html.

Get instant help from 5000+ experts for
question

Writing: Get your essay and assignment written from scratch by PhD expert

Rewriting: Paraphrase or rewrite your friend's essay with similar meaning at reduced cost

Editing: Proofread your work by experts and improve grade at Lowest cost

loader
250 words
Phone no. Missing!

Enter phone no. to receive critical updates and urgent messages !

Attach file

Error goes here

Files Missing!

Please upload all relevant files for quick & complete assistance.

Plagiarism checker
Verify originality of an essay
essay
Generate unique essays in a jiffy
Plagiarism checker
Cite sources with ease
support
Whatsapp
callback
sales
sales chat
Whatsapp
callback
sales chat
close