Unlock Explanations of Mechanical Engineering Queries : Page - 11

Submission Guidelines1.The coursework should be your own work and should be properly type-written in your own words. Marks will be reduced for the typo-errors and missing units. The assignment will be checked for plagiarism using TURN-IT-IN software. Any plagiarism or copying from others will be dealt through the university’s plagiarism procedures. Similarity (plagiarism) level higher than 10% is highly suspicious. 2. The whole report s...

Studio room is designed to be maintained at 24qC and 50% relative humidity and experiences a sensible cooling load of 60 kW and a latent load of 40 kW. The air conditioning system is equipped with a cooling coil followed by a heating coil. The cooling coil has been selected to provide fully saturated outlet air at 8qC. Determine the following:i. The supply air conditionsii. The supply air flow rateiii. The amount of reheating providedA Psychrome...

Question: Module Learning Outcomes The following module learning outcomes and professional body learning outcomes are tested in this assessment: (LO1) Define and analyse engineering fluid flow problems using the Navier Stokes equations. Simplify flow problems and solve them exactly. (SM1m, SM2m, G1)(LO2) Construct appropriate solid models for CFD analysis, setup the solution domain and generate suitable surface and volume grids via meshing t...

1. The Bode plot of a mechanical plant is shown in Fig. 1. (a) What will be this mechanical plant’s steady-state output if it is subjected to an input of r(t) = 2sin(5t) – 6cos(20t + ?)?   (b) A unity feedback system is implemented on this mechanical plant. i. Determine if the system is stable. ii. Determine the system’s steady-state error when subjected to a unit step input.  iii. Determine the system’s...

Steady-state output with given inputThe Bode plot of a mechanical plant is shown in Fig. 1. (a) What will be this mechanicalplant’s steady-state output if it is subjected to an input of r(t) = 2sin(5t) –6cos(20t+ ?)? (b) Aunity feedback system is implemented on this mechanical plant. i.Determine if the system is stableii.Determine the system’ssteady-state error when subjected toa unit step input iii.Determine the system’s...

Background and OverviewInformation Technology (IT) has led to radical transformation of manufacturing industry worldwide. Use of computers in smart devices has been accompanied by a trend for more and more IT infrastructure and services to be provided through networks such as clouds. These smart devices are increasingly being inter-connected as well as with the Internet. This has resulted in the convergence of the physical world and the virtual ...

What is the S/N Curve?With reference to the fatigue graph (S/N curve) below answer the following questions: i) What is the name used for the horizontal section of graph exhibited by the 1045 steel sample and explain why it is a desirable feature for materials to show. ii) Your boss has asked you to calculate the minimum allowable diameter for an aluminium component subjected to a load cycle of +/- 3000 N, where the component must last at ...

Coursework Objectives• The course work aims to address all the module learning outcomes by focussing on the quantitative descriptions on Structures and Mechanical Properties of Engineering Materials and by incorporating a comprehensive understanding of the various failure modes and design criteria for materials selection. • The module learning outcomes are provided in the coursework brief. • University requests all student to ...

Course Code   :  7AAD0054

Course Title   :  automotive dynamics and safety

Ref style  :  Oxford

4/5 

Learning OutcomesThis Assignment assesses the following module Learning Outcomes (Take these from the module DMD) This assignment aims to enhance students’ knowledge on theoretical modelling or applied computer simulation or other practical methods to analyse vehicles dynamics and vibration. The successful student will be able to: ? Apply analysis techniques to load the suspension model ? Use applicable method to model quarter car ...

Course Title   :  School of Civil Engineering and Surveying

Ref style  :  APA

4/5 

Question: Tasks: Produce an individual poster showing the development and final designs of a new building to replace the main Richmond Building Lecture Theatre (RB LT1). You need to develop a creative design for a new building to replace Richmond Building LT1.  The new building is to be used for academic purposes and should contain at least one lecture theatre, plus whatever other facilities you wish (class rooms, offices, computer rooms...

Importance of Drive Train and its ComponentsThe drive train and drive train assembly are very important part of wind turbine in generation of energy. The rotations of wind turbine’s rotor and hub are converted into electrical energy using the drive train. Generally, the drive train assembly of a wind turbine comprises of following component: main bearings, main shaft, gearbox, brake, and generator. Due to the rotating components and cha...

Course Code   :  7AAD0064

Course Title   :  manufacturing strategy

Ref style  :  Harvard

4/5 

Late submission policy for coursework·Late submission of any item of coursework for each day or part thereof (or for hard copy submission only, working day or part thereof) for up to five days after the published deadline, coursework relating to modules at Levels 0, 4, 5, 6 submitted late (including deferred coursework, but with the exception of referred coursework), will have the numeric grade reduced by 10 grade points until or unless...

Course Code   :  KB7040

Course Title   :  sustainable development for engineering practitioners

Ref style  :  Open

4/5 

Module Learning OutcomesThis module will develop the theme of the role and responsibility of the engineer within society and enable the student to place sustainable development within the context of professional engineering practice. To support the successful professional practice, as defined by the Engineering Council, engineers need social literacy and an appreciation of the wider issues in sustainable development which are the focus of th...

Main steps in implementing a condition monitoring programWhat are the main steps in the generic procedure for implementing a condition monitoring programme which are outlined in BS ISO 17359:2011? Answer the following about condition monitoring techniques, according to your experience during the module: 1- With the aid of a block diagram, outline the main elements of a vibration analysis system 2- Name two vibration analysis methods used to...

Course Code   :  D28MA

Course Title   :  Civil Engineering Materials

Ref style  :  Not Selected

4/5 

The load applied to the beam is then to be recorded against the displacement obtained fromthe central dial gauge as shown above. The results of the test can then be used to determinethe beam’s flexural Young’s Modulus.The Technicianwill now go through the procedure with you inmore detail. The following sheets of this handout must be used to provide a report on theexperiment. You must answer the questions given in Bold.1) Draw the beam...