Civil Engineering : Page - 4

Strategic Information System PlanningStrategic Information system planning refers the process of integrating information system and database information through more advance and efficient network based data collection, database management and data processing operation in order to improve the data and information handling within a business organisational structure (Cassidy 2016). The cardinality of different data sates id relies on the Enterpri...

Thesis Statement for a 5-10 Page Research Paper50. Click on the passage that would work better as a thesis statement for a three-to-five-page college paper. Remember that a thesis should be a central idea that requires supporting evidence; it should be of adequate scope for a three-to-five-page paper; and it should be sharply focused. Because it has become outdated, the electoral college should be replaced by a system that allows the US presi...

Responsibilities of Professional Engineers in Transportation FieldProfessional engineers are bound by a statutory responsibility, which incorporates a Code of Ethics and necessitates that they put open welfare over every other intrigue. Authorized specialists must finish particular scholastic and work encounter prerequisites to acquire their licenses. As per the Professional Engineers Act, the present routine with regards to building in the ar...

Art and architecture in human livesThe above quoted lines of Thomas Merton, the famous art critic speaks volume about the significance which the various forms of art as well as architecture hold in the lives of the people. The various forms of art have formed an important part of the lives of the human beings since the traditional times and it is a reflection of this particular fact that since the traditional times the people have indulged i...

Introduction to BIM and its applicationDifferences of BIM Adoption between Developed and Developing Countries Case study of Australia and Libya This chapter essentially introduces the concept and the overall view on the research topic.  In essence, it tries to make the reader understands the whole concept and the background regarding the study (Ghaffarianhoseini et al. 2017 p.1046). Furthermore, the chapter analyses the overall literatur...

History of Modular Design in ArchitectureModular design is a type of design technique where a system is subdivided into smaller components referred to as modules. These modules are created independently away from the site (usually prefabricated in a factory) and then delivered to the site for installation or assembly. This design approach has been in existence for over a century now and has gone through numerous transformations to meet specifi...

Conceptual Design of Hoover DamThis paper presents the analysis of the design process of the hoover dam, located in  Nevada/ Arizona, and united stated focusing on the conceptual design phase of the dam. The conceptual design of the dam normally considers the analysis requirement of the dam during the construction, functional analysis, a requirement so f systems operation, measurement of the performance, system planning, identification, m...

Background and evolution of duty of care in Tort LawThe duty of care is a necessity under Tort Law. However, this concept has not been developed overnight. In the past few centuries, the duty of care has been evolved and became a lead base of negligence under Tort Law. By the end of the 17th century, negligence has started coming into the eyes of people in the form of an individual wrongdoing. People in such a scenario were started asking...

Company BackgroundInternode Pty Limited is one of the most recognizable broadband service providers occupying a predominant place in the Australian market. The primary services that this organization delivers to its consumers include voice over IP, variety and IP, web hosting, co-location (Internode.on.net, 2018). Providing superior quality of products and services is the primary mission of Internode Pty Limited. In quest of grabbing the atten...

How does this act WorkThe government of New South Wales has enacted the Building and Construction Industry Security of Payments Act 1999 (the ‘Act’). The purpose for the introduction of this act is to tackle the challenges which are faced by contractors, sub-contractors and suppliers regarding receiving the payments for their products or services. This act governs these parties to ensure that they receive their payments within appr...

Theoretical ApplicationIn this paper, emphasis shall be put on the examination of the key variables while undertaking investment decisions in a construction business. The paper will also discuss what entails successful chain management among other important aspects and there after draw a logical conclusion. Coast wide should consider a number factor when choosing which country to open a new business or make an expansion within the Asian-P...

Part aCrypto currency is a digital asset that is designed for transferring the assets. It is a form of digital currency that works on decentralized control system. In this report the focus is on bit coin and ethereum. If considering the popularity bit coin is more popular as it came before in the market. It became popular due to open source, decentralised and resistant network. Bit coin and ethereum differs from each other in terms of their us...

Project ScopeThe Advanced Decision Making is composed cohere to the AS 4120-1994 and it has been detailed in the section 3 page.5 The tender has been developed as per project to construct the 50 storey building in Australia The Statement interrelated with ethics is composed cohere to the AS 4120-1994 and it has been detailed in the section 4 page.5 Illustrated Project Definition The Illustrated Project Definition is composed cohere to ...

Priority to treat risk Risk rating Potential impacts of risk Sources of information about risk Causes of risk Identified risk High 7/10 The risk may cause accidents and may injure the employees which would make the agency liable for the injury The information in relation to this risk can be obtained via the accidents records, the safety procedures in place and compliance level records. ...

Overview of Cloud ArchitectureThe cloud architecture can be classified depending on the service model and the deployment model. The cloud architecture can to categorized in three different kinds  according to the service: Platform-as-service: Platform-as-service provides the run time application to the users. The users can  run and develop the application using this service (Thakkar et al.,2016). One of the major platform-as-se...

Task 1: Recovering scrambled bitsThe WinHex is the software tool used by forensic experts around the world for various purposes like to repair headers of files, editing the files in binary mode and scrambling of data which can only be reversed if the correct order is known. In order to recover the scrambled bits we need to do the following:   Modify Data-> “left shift by 1-bit option”   Output:   Output and d...

Challenges in Strategic Management for Bayut.comStrategic management can be termed as the process of development and establishment of plans and tactics for an organizational structure (Varma, Bhalotia and Gambhir, 2018). In the broader term, strategic management can be considered as a continuous process of monitoring, planning, analyzing and assessing all the necessary that are required by the business organization for the attainment of the...

External environment analysisPantene is a brand of an American organization named Procter & Gamble. The product of Procter & Gamble was introduced in year 1945 in Europe. The product was introduced in the market by Hoffman-La Roche who belongs to Switzerland. The brand Pantene was purchased by Procter & Gamble in the year 1985 for the purpose of competing with the beauty products offered by the organizations. The 2 in 1 Pantene Pro...

What is High Availability Architecture?In reality, it’s possible to experience circumstances whereby when a dip in execution of the servers may happen from occasions running from an abrupt spike in rush hour gridlock can prompt an abrupt power blackout. This maybe more terrible and the servers may be disabled independent of whether the applications are facilitated in the machines that are physical or cloud. It’s not possible to avo...

Site Survey and Geotechnical ReportCLIENTS BRIEF AND SPECIFICATIONS The overall budget for the entire project is about $275,000 and this is considered as adequate for all the specifications and the works to be conducted in the construction. The project will begin with site survey preparations which have already been done and this survey depicts that the site slopes down from the rear alignment to the front alignment. Also, there are there are...

Task 1: Recovering scrambled bitsTask 1 WinHex is the digital forensic software used around the world for editing the files in binary using hexadecimal codes, the editing include cut, copy, paste, edit, delete, insert etc. It is also being used to reverse the logical and arithmetic expressions performed on the data, we would be using this method to recover the data from the scrambled bits. (Srinivasan, 2006) Modify Data-> “left shif...

Project Plan Types1.  There are different types as well as specifications for the project  and these are mainly discussed as follows Project plan is defined as the overall systematic analysis and specifications of the activities to be carried in a project. The various types of the project plans include Strategic project plan- it mainly entails all the aspects and analysis which are conducted with an objective of establishin...

Signalized Intersection Design Concepts and DefinitionsThis design paper on road and traffic engineering is about signalized intersection design of a morning peak traffic count at an urban residential intersection by analyzing numerous theories and concepts in signalized intersection design that incorporates aspects such as green splitting, the design of cycle length, and design of phase. Intersections may be signalized to improve crossing opp...

Representation of data in One's complement, Two's complement, Signed magnitude and Unsigned magnitude1). a. One’s complement -(2N-1-1) to 2N-1-1 : therefore when n=8 we get : -27-1 to 27 - => -127 to 127 Two’ complement         -2N-1 to 2N-1-1 : therefore when n=8 we get : -27 to 27-1 => -128 to 127 Signed magnitude       &...

Question 1: a) Given (152) x= (6A) 16    X2 + (5 * X1) + (2 * X0) = (6 * 161) + (10 * 160) X2 + 5X + 2 = 106 X2 + 5X - 104 = 0 X2 + 13X - 8X – 104 = 0 X(X + 13) – 8(X + 13) = 0 (X - 8) (X + 13) = 0 X = 8 and X = -13 Therefore,  X is 8. (152)8= (6A) 16  b) i) BED = (B * 162) + (E * 161) + (D * 160)       = 2816 + 224 + 13       = (3053)10 (3...